Step Stakes

10" x 30" 2-Wire Step Stakes, case of 50 stakes. used with the 4mm corrugated plastic sheets.

10" x 30" 2-Wire Sturdy Reinforced Step Stakes, 50 Stakes per case. works with the 4mm Corrugated Plastic Sheets. Recommended for corrugated signs up to 24" x 18". A second stake can be inserted at a right angle to the sign for more rigidity. This stake offers a reinforced bottom specifically designed for hard ground

10" x 24" 2-Wire Step Stakes, 100 Stakes per case. Used with the 4mm Corrugated Plastic Sheets. Recommended for corrugated signs up to 24" x 18". A second stake can be inserted at a right angle to the sign for more rigidity. This is one of our most popular stakes.

Extra Heavy Duty U-Top 10" 30" Step Stakes, 25 Stakes per case. Used with our 4mm Corrugated Plastic Sheets. A bit shorter with longer uprights and 4 welds, all of which make it a bit sturdier in windy conditions. The trade-offs are that the bottom part of the U shows when the sign is installed and the sign sits a bit lower to the ground.

Heavy Duty Galvanized Coro-Stake, 10 Stakes per case. Used with our 8mm & 10mm Corrugated Plastic Sheets. This Heavy Duty Galvanized Coro-Stake is for use with standard 8 mm or 10 mm corrugated plastic sheets.

10" x 15" 2-Wire Step Stake, 100 Stakes per case. Used with our 4mm Corrugated Plastic Sheets. The sign frame is exactly like the SS1 but is only 15" high. For use with corrugated signs up to 24" x 18".

Economy 6" X 30" Step Stakes, 75 Stakes per case. These Stakes are used with our 4mm Corrugated Plastic sheets. For small to medium corrugated signs. Recommended for signs up to 22" x 14". For large signs, you can use two or more of these stakes to provide support across the base of the sign. Constructed using 9 gauge steel.

Extra Heavy Duty 6" x 30" Step Stakes, 50 Stakes per case. To be use with our 8mm & 10mm Corrugated Plastic Sheets. Heavy Duty stake for signs using 8-10mm Coroplast. Constructed using 1/4" x 3/16" steel.

3-Wire 10" x 30" Step Stakes, 50 Stakes per case, use with our 4mm Corrugated Plastic Sheets. Heavy duty for corrugated signs or for solid fiber signs. Recommended as a more rigid stake for corrugated signs up to 28" x 22". This stake may also be used for solid core signs, by weaving the sign in between the uprights of the stake.

2" x 16" Mini Step Stakes, 100 Stakes per case, to be used with our 4mm corrugated Plastic Sheets. For small corrugated signs. This stake is perfect for small low-set yard signs, such as security system and lawn service signs. When installed, this stake places the bottom of the sign 8" off of the ground.

2" x 12" Sign Waver Step Stakes, 50 Stakes per case. To be used with our 4mm Corrugated Plastic Sheets. Great for small signage and events.

10" x 38" Single Shaft Step Stakes, 25 Stakes per case. Works great with our 4mm Corrugated Plastic Sheets. For markets where zoning restrictions limit sign design to a single support, and this design is perfect for this application. The shaft is a sturdy 5/16" mill galvanized steel that has a 9 gauge stabilizer welded near the bottom in addition to a 9 gauge U-top for holding the sign. This stake is a bit taller than our other designs and will hold the bottom of the sign 24" above ground level when installed. This stake is also a more economical alternative to our traditional double shaft U-Top stake when you need a rigid base for your customer's sign.

2" x 20" Sign Waver Step Stakes, 50 Stakes per case. Works with our 4mm Corrugated Plastic Sheets. Hand held stake for parades, conventions, school crossings, strikers. The ladder type 9 gauge galvanized wire with cross members spaced every 8" makes a rigid lightweight holder for hand held signs. Applications include school crossings signs, construction stop signs, protest signs, political rallies, parades, etc

2" x 28" Sign Waver Step Stakes, 50 Stakes per case. Works with our 4mm Corrugated Plastic Sheets. Hand held stake for parades, conventions, school crossings, strikers. The ladder type 9 gauge galvanized wire with cross members spaced every 8" makes a rigid lightweight holder for hand held signs. Applications include school crossings signs, construction stop signs, protest signs, political rallies, parades, etc.

6" x 8" Piggy Back Step Stakes, 50 Stakes per case. Works with our 6mm Corrugated Plastic Sheets. For stacking corrugated signs. Developed for adding a "rider" on top of real estate signs. This stake can also be used to splice signs together for a sign display.

T-Top 8" x 3" Step Stakes, 100 Stakes per case. Works with our 4mm Corrugated Plastic Sheets.

26" x 40" U-Stake Step Stakes, 50 Stakes per case. works with our 4mm Corrugated Plastic Sheets.

6" x 8" Piggy Back Step Stakes, 50 Stakes per case. Works with our 10mm Corrugated Plastic Sheets. For stacking corrugated signs. Developed for adding a "rider" on top of real estate signs. This stake can also be used to splice signs together for a sign display.

Heavy Duty 6" x 30" Step Stakes, 50 Stakes per case. These stakes can be used with our 5mm & 6mm sheets. Heavy Duty stake for signs using 5-6mm Coroplast. Constructed using 3/16" x 3/16" (7 gauge) steel.

Long Comic Book Bin - Black. Our Graded Comic Bin is a heavy duty comic box made from acid-free, reinforced, snap-together panels. The standard and Graded Comic Bin holds about 30 graded and slabbed comics and includes a movable partition that helps stand up your growing stack of comic books. Identification slots on the ends help you mark your boxes with either an index card or a top loading card holder. The lid panels feature sliding locks for added security. Holds 100 - 125 Comic Books. Made in the U.S.A.